I get this log but
Code: Select all
MAIN
szExeFile Project1.exe
cntUsage 0
dwSize 556
th32ProcessID 2788
th32DefaultHeapID 0
th32ModuleID 0
cntThreads 21
th32ParentProcessID 8408
pcPriClassBase 8
dwFlags 0
===================================
szExeFile Project1.exe
cntUsage 0
dwSize 556
th32ProcessID 7276
th32DefaultHeapID 0
th32ModuleID 0
cntThreads 10
th32ParentProcessID 2788
pcPriClassBase 10
dwFlags 0
===================================
szExeFile Project1.exe
cntUsage 0
dwSize 556
th32ProcessID 6352
th32DefaultHeapID 0
th32ModuleID 0
cntThreads 12
th32ParentProcessID 2788
pcPriClassBase 8
dwFlags 0
===================================
szExeFile Project1.exe
cntUsage 0
dwSize 556
th32ProcessID 6696
th32DefaultHeapID 0
th32ModuleID 0
cntThreads 1
th32ParentProcessID 2788
pcPriClassBase 8
dwFlags 0
===================================
4
There are two components of Chromium1
and
Chromium2
both have a page loaded
Chromium1 I want to close and then
restart
But sometimes the process does not have time to close and an error occurs about the launch where it asks to close the application and start again, although all the events on the burial were worked out correctly.
I set a delay for opening, but this is not a solution because sometimes the process does not want to close within a minute or two or five
This is extremely rare but still occurs. And therefore, you would like to know the id of the process that should be checked for this browser before starting it.